Mirror Attachment - Explained

RSS
Mirror Attachment - Explained

The motorcycle mirror attachment will fit on mirrors, fairing bars and cross bars with a diameter between 8-16mm.  The mirror attachment has the 25mm / 1" ball head which allows for a wide range of adaptors to be used.

Ultimateaddons Mirror Mounting Attachment

Mirror Stem Attachment 

The first thing to do is check the diameter of your mirrors, some mirrors the diameter can change, however as long as the diameter is within 8-16mm the attachment should grip fine.   There are two screws on the attachment that need to be removed using an Allen key. Now position the attachment where you think would be best, normally sitting on the bike and doing this is best and tighten but don't fully tighten until you are 100%.  Add the rubber covers to hide the screws once your 100% as they can be fiddly to remove afterwords. 

Motorcycle Mirror Mount

Once Attached 

Now that you have a 25mm ball attachment you have a wide choice of products that you can now attach to your motorcycle.  As the handlebar clamp bolt attachment has the 25mm / 1" ball head you can also connect the 3" extender to give you freedom with positioning.

Mirror attachment fitted with extender

Suitable for a wide range of electronic devices

Mirror Mount Attachment by Ultimateaddons

Click here to buy the Ultimateaddons Mirror Mounting Attachment

Previous Post Next Post

  • Steven Gourlay
Comments 0
Leave a comment
Your Name:*
Email Address:*
Message: *

Please note: comments must be approved before they are published.

* Required Fields
Sale

Unavailable

Sold Out